All right friends without due I will come on my point.
You can use this in an dark room where everything is dimmed.As it is very cheap but also take care of it.
Uses of Smartphone Projector
1.)It uses your smartphones screen to display the projected screen.
2.)We can project it on a white board or black walls.
3.)As expected if you clean the the projectors lens you will be able to see sharp clear and more colourful screen.
Now lets start.
For making smartphone projector out of cardboard make sure we have a
1.)Magnifying Glass.
2.) Shoe Box (You can use other cardboard material also.)
3.)Some glue of high quality.(I Consider using Fevicol)
4.)Dark Black paint.
5.)A smartphone itself.
Now lets Get started:-)
1.) Glue the Flaps of Shoe box on both sides. (I will add pics later)
2.)Paint the Full Box with Black Colour.
3.)Now cut the Handle of the Magnifying Glass.
We will use the lens as for the further projection.
4.)Carefully mark the Lens on the center where we glued the flaps.
5.)Now take the cutout.
If you successfully make a perfect cutout the lens will perfectly fit in it.
6.)Now we have to make the box Covered.Well if the shoe box cover doesn't fit then try cutting it by the old template when we made the hole for lens.
7.)Last thing but not least The Holder
To make holder we can use anything.We will use A Cardboard.
Things to keep in mind for making holder
1.)The holder must Stand at an 90 Degree angle.
2.)For making holder make sure the width fits in the size of our projector cardboard.
We are now 95% Done.
How to make smartphone Holder or Stand :-
1.)Carefully cut the cardboard as its width fits in the shoebox projector.
2.)Now take one more perfect cutted cardboard.
3.)Now at the Centre we can Glue it hard so that it can accept your phones weight.
4.)Now use any back cover (optional) to stick it via velcro band or dual sided sticking papers.
5.)Carefully apply the device on the holder which we made.Make Sure still is it at 90 degree to prevent image distortion.
Done we did the 95% work.
Now while projection does it seems to blurred then
How to focus the image or Video on Wall or projected screen.
For that just
Take it back or forward until it focuses image.
This is it we have Completed Our Project.
Enjoy...!
Also I would be adding photos after sometime.
Thanks for Reading....!
Guys I Need an Help with this project.
Edit-:)
Can painting Black Colour inside Box Project more brightness.And If I Use Some Paper clips and Some Handle for Cardboard holder will it work.
Plz friends
New ideas are welcomed......!
Comment down below ......!
Thankyou......!
Comments
Post a Comment