How to Make A Powerful Fan With Home Supplies

Hello guys and welcome to an new article.In this article we are going to take a look on how we can make a Usb Fan or Regular Fan With Motor within just using 1$ !So without further delay, let's get started :-

Things Needed :-

1.)An Electric Motor (Will cost 1$)
2.) Electric Battery (Small 9V Battery)
3.) Flexible Cardboard / Flexible Plastic
4.) Electric Wires (Not much long in length)
5.)Glue - Any Kind of Glue will workout.
6.)An Plastic Bucket / Any Container - To keep Ice or cold water in it.
7.)Duct Tape or Any Tape to Stick our electric fan upon the bucket.

Process :-

Now all stuff is very easy.And we can start assembling everything and make our Motor Fan DIY with Home supplies in 5Minutes!

Step 1 :- Take the Top Pin Point of the Electric Motor and make a small hole in the cardboard.

Step 2 :- Once you make a small hole in the Cardboard,take the cardboard and make sure that the point where you made is the centre and cut out an perfect circle.Make sure its an Perfect Circle but it would still work of its not an Perfect circle.

Step 3 :- Make 3 Striped Lines on the Cardboard cutout and just make it look like the fans on our ceilings (just for reference) and you may cutout any type of stripes.You can make 3 wings on Cardboard cutout and it will work fine.

Step 4 :- Attach the Cardboard cutout on the electric motor and just try using it with the battery and check the speed and amount of air flow.Definitely it will be good.In case the airflow isnt good ,or the motor is not moving just get another cutout.

Step 5 :- Attach the Electrical wires on the battery on one side and another side with the Motor and make sure to check if they're connected properly , just check positive terminal and negative terminal.

Step 6 :- Apply Glue or Duct tape the wires and tighten then enough or else in loose connections it will degrade the quality of the motor.

Step 7 :- Make an Small Holder for the battery and  the motor.Now this is simple.Just Grab an Plastic Bottle and glue the battery on the Bottle and keep the motoe faced to you,so that it won't interfere with the bottle and wont crash the Cardboard fan with the bottle.

Step 8 (Optional) : - Connect the wires with an switch ,when you're done with connecting wires with switch,just try turning it on and off and make sure its working.

And Done Boom.Your Own Made DIY Fan is Now ready to be used.

Note : - It is just an DIY Made Electric Fan with Home supplies and it will not give an air flow as an Regular fan at the stores would.This is just an showcase and emergency needed DIY.

So this is it guys ,i hope you liked this article.

Feel free to comment down below your thoughts, opinions and upgraded versions about this DIY.
With that been said ,have a Nice day!